It is now common practice to build personal FTP servers and use remote desktops on campus LANs.Since the LAN gives FTP a transmission speed of up to 10M, it becomes an excellent sharing tool.Due to the discovery that the school’s computers support IPv6, but also consider that IPv6 addresses are not insufficient as astronomical numbers, the author whim: Can you establish IPV6 FTP and WEB servers by establishing IPV4 FTP and WEB methods?Even achieve interoperability between different schools to support IPV6 users!
The results of the experiment are exciting and this method is indeed feasible!Let's release my test result chart below:
The author used this FTP to successfully achieve a direct FTP file transfer with a student far away from Hunan University.
- Ping test results:
Tutorial: Setting up an IPV6 FTP and web server for cross-school access
Win7 and above computer (XP method to open IPV6 please Baidu)
- Serv-u FTP creation software, XAMPP web environment construction software
- Network with IPV6 access
(Note: XAMPP supports PHP, etc. Simple html and simple FTP service win7 comes with it, you can not install the above two software)
- Install the IPv6 protocol and verify that there is IPv6 access:
Click the network icon in the lower right corner to open the "Network and Sharing Center" - Local Area Connection - Properties - This connection uses the following items
- Get the native IPv6 address through the ipconfig command
- Set up an FTP server
To set up an IPV6 FTP server, just like the IPV4 FTP server, open the serv-u management console. Click on "Configure domain listener" in the domain details and add the listener as shown below: Type: FTP IP address: Your IPV6 address In order to verify whether or not you are successful build, you can type in the browser: ftp://[your IPV6 address]
- Build a web server
Build a web server you can Baidu, I recommend "XAMPP" this software, in order to verify whether you are successful build, you can type in the browser: http://[your IPV6 address] Here are my experimental results:
The above WEB and FTP server visits, the author tried to pass the IPV6 classmate computer on my other university, can directly pass files through the IPV6 network and visit the WEB page
Advanced articles: Add domain name resolution to the local IPV6 address, make a friendly IP/IPV6 network web/ftp server!
As you can see from the above, the IP address of IPV6 is extremely long. Compared with 32-bit IPV4, up to 128-bit IPv6 is a full four times. This is not good for our memory. We can resolve our own domain name to our computer. IPV6 address.
The specific method is
Add "AAAA" record in the domain name management to your IPv6 address, the author is using the DNSpod to manage their own domain name, as shown below
This tutorial was originally written by me and there are fewer similar resources on the Internet. I hope everyone can criticize and correct me.
This article has been printed on copyright and is protected by copyright law. It must not be reproduced without permission.If you need to reprint, please contact the author or visit the copyright to obtain the authorization. If you feel that this article is useful to you, you can click on the "sponsored author" below to reward the author!
Reprinted Note Source: Baiyuan's Blog>>https://wangbaiyuan.cn/en/setting-up-ipv6-ftp-and-web-server-implements-cross-school-access-2.html